home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Supervisor's Toolkit
/
Network Supervisor's Toolkit.iso
/
novell
/
nw386
/
append-a.386
< prev
next >
Wrap
Text File
|
1996-07-10
|
5KB
|
89 lines
Appendix A
Server Installation Flow Chart
The simplicity of the entire NetWare 386 installation
process is illustrated in the flow chart below.
Server INSTALLATION (Quick Path)
┌──────────────────────────────────────┐
│ Set Up the Hardware │
├──────────────────────────────────────┤
│ 1. Record hardware information │
│ 2. Install drives, boards, and cables│
│ 3. Run computer setup program │
└────────────────────┬─────────────────┘
│ ┌──────────────────────┐
├────────────────┤ Run DISKSET for DCBs │
┌──────────────┴─────────────┐ └──────────────────────┘
┌─────────┤ Decide Server Boot Method ├────────┐
│ └────────────────────────────┘ │
┌────────────────┴───────────────────────┐ ┌────────────────────┴─────────────────┐
│ Boot with Diskette │ │ Boot with DOS Partition │
├────────────────────────────────────────┤ ├──────────────────────────────────────┤
│ 1. Boot DOS │ │ 1. Boot DOS │
│ 2. Create server boot diskette │ │ 2. Run FDISK │
│ a. Format a:/s │ │ a. Create DOS primary partition │
│ b. Copy OSDISK files to boot diskette │ │ (Size 22 [1 meg]) │
└────────────────┬───────────────────────┘ │ b. Make DOS partition active │
│ │ 3. Format C:/s │
│ │ 4. Copy OSDISK files to C: │
│ └────────────────────┬─────────────────┘
└────────────────────────┬──────────────────────┘
┌────────────────────┴──────────────────┐
│ Run SERVER Utility │
├───────────────────────────────────────┤
│ 1. Run SERVER │
│ 2. Name server │
│ 3. Type internal network number │
│ 4. Load disk driver module (eg. ISA) │
│ 5. Load other loadable modules │
│ 6. Load LAN driver module (eg. ARCNET)│
│ (<Enter> to accept defaults) │
│ 7. Bind IPX to [network driver] │
│ 8. Assign network number │
└────────────────────┬──────────────────┘ ┌───────────────────────┴─────────────────────┐
│ Load INSTALL Utility │
├─────────────────────────────────────────────┤
│ 1. Load INSTALL │
│ 2. Create NetWare Disk Partition Tables │
│ (<Enter> to accept defaults) │
│ 3. Mirror drives │
│ 4. Create volumes (Then <Alt><Esc>) │
│ 5. Mount volumes (Then <Alt><Esc>) │
│ 6. Add name space support │
│ (eg. ADD NAME SPACE MACINTOSH TO │
│ VOLUME SYS <Enter>) │
│ 7. Copy system and utility files │
│ 8. Create AUTOEXEC.NCF │
│ 9. Create STARTUP.NCF │
│ (Save to C: for DOS partition) │
│ (Otherwise, Save to boot diskette in A:) │
└───────────────────────┬─────────────────────┘
┌─────────┴──────────┐
│ Down Server │
├────────────────────┤
│ 1. Down │
│ 2. Exit │
└─────────┬──────────┘
┌─────────────┴───────────────┐
│Create Server Boot File │
├─────────────────────────────┤
│ Copy con autoexec.bat │
│ server <Ctrl>Z │
└─────────────┬───────────────┘
┌──────────┴────────────┐
│ Boot Server │
└───────────────────────┘